Filter
Top Products
424
ACP Measurement
Meas Setup
parameters.
Abs Limit
Enters an absolute limit value, which sets the absolute amplitude levels to test against for each of the
custom offsets. The list must contain six (6) entries. If there is more than one offset, the offset closest to
the carrier channel is the first one in the list. [:SENSe]:ACP:OFFSet[n]:LIST:TEST selects the type of
testing to be done at each offset.
You can turn off (not use) specific offsets with the [:SENSe]:ACP:OFFSet[n]:LIST:STATe command.
The query returns the six (6) sets of real numbers that are the current absolute amplitude test limits.
Key Path Meas Setup, Offset/Limits
Initial S/W Revision A.03.00
Key Path
Meas Setup, Offset/Limits, Limits
Mode WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD
Remote Command [:SENSe]:ACPower:OFFSet[1]|2:LIST:ABSolute <real>,
<real>, <real>, <real>, <real>, <real>
[:SENSe]:ACPower:OFFSet[1]|2:LIST:ABSolute?
Example ACP:OFFS2:LIST:ABS –10,–10,–10,–10,–10,–10
ACP:OFFS2:LIST:ABS?
Notes Offset sub op code. 1 for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Couplings None
Preset WCDMA: 50 dBm, 50 dBm, 50 dBm, 50 dBm, 50 dBm, 50 dBm| 50 dBm, 50
dBm, 50 dBm, 50 dBm, 50 dBm, 50 dBm
C2K: 50 dBm, 50 dBm, 50 dBm, 50 dBm, 50 dBm, 50 dBm| 50 dBm, 50
dBm, 50 dBm, 50 dBm, 50 dBm, 50 dBm
1xEVDO: –27 dBm, –27 dBm, –13 dBm, –13 dBm, –13 dBm, –13 dBm |
–27 dBm, –27 dBm, –13 dBm, –13 dBm, –13 dBm, –13 dBm
LTE: –8.45, –8.45, –8.45, –8.45, –8.45, –8.45| –50.0, –50.0, –50.0, –50.0,
–50.0, –50.0
State Saved Saved in instrument state.
Min –200.0 dBm
Max 50.0 dBm
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00