Filter
Top Products
617
Occupied Bandwidth Measurement
Meas Setup
Occ BW % Pwr
Assigns the percentage of the total power that is measured within the Occupied Bandwidth for the
current measurement. The resulting Occupied Bandwidth limits are displayed by markers placed on the
frequencies of the specified percentage.
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: [:SENSe]:OBWidth:MAXHold ON|OFF|1|0
[:SENSe]:OBWidth:MAXHold?
Example: OBW:MAXH ON
OBW:MAXH?
Notes: You must be in the W-CDMA mode, cdma2000 mode, TD-SCDMA mode,
BLUETOOTH mode, LTE mode, LTE TDD mode, WLAN mode, 1xEVDO
mode, or WIMAX OFDMA mode to use this command.
Use:INSTrument:SELect to set the mode.
Couplings: Max Hold is coupled to Average/Hold state. The Max Hold function is
activated only if Average state is On. If Max Hold is changed to On when
Average state is Off, Average state is automatically set to On.
Preset: OFF
State Saved: Saved in instrument state.
Range: On | Off
Backwards Compatibility SCPI: [:SENSe]:EBWidth:MAXHold
Initial S/W Revision: Prior to A.02.00
Modified at S/W Revision: A.03.00
Key Path:
Meas Setup
Mode: WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, LTE, LTETDD,
BLUETOOTH, WLAN
Remote Command: [:SENSe]:OBWidth:PERCent <real>
[:SENSe]:OBWidth:PERCent?
Example: OBW:PERC 75
OBW:PERC?
Notes: You must be in the W-CDMA mode, cdma2000 mode, TD-SCDMA mode,
BLUETOOTH mode, LTE mode, LTE TDD mode, WLAN mode, 1xEVDO
mode, or WIMAX OFDMA mode to use this command.
Use:INSTrument:SELect to set the mode.
If Mode is BLUETOOTH, the key will be grayed out.
Preset: 99.00