Filter
Top Products
973
Input/Output
Correct Source and Analyzer
Sets the corrections for the multiport adapter RFIO 5 port to be applied to both the source and the analyzer.
RFIO6
The port to which the current corrections are applied. Pressing this key again allows the user access to the menu for
specifying to which internal device and multiport adapter RF path the corrections for multiport adapter RFIO 6 are
applied.
Correct Source
Sets the corrections for the multiport adapter RFIO 6 port to be applied to the source.
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO5
ANAL
Readback: "Correct Analyzer"
Initial S/W Revision: A.10.0
Key Path:
Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, RFIO 5
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO5
BOTH
Readback: "Correct Source and Analyzer"
Initial S/W Revision: A.10.0
Key Path:
Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, Page 2
Remote Command: [:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO6 SOURce |ANALyzer |BOTH
[:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:RF:PORT:RFIO6?
Example: :MPAD:CORR:CSET:RF:PORT:RFIO6 BOTH
Preset: Both
State Saved: Saved in State
Initial S/W Revision: A.10.0
Key Path:
Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties, RF Port, RFIO 6
Example: :MPAD:CORR:CSET[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16:RF:PORT:RFIO6
SOUR
Readback: "Correct Source"
Initial S/W Revision: A.10.0