Filter
Top Products
965
Input/Output
The correction to be used for each bucket is taken from the interpolated correction curve at the center of the bucket.
Description
Sets an ASCII description field which will be stored in an exported file. Can be displayed in the active function
area by selecting as the active function, if desired to be in a screen dump.
Comment
Sets an ASCII comment field which will be stored in an exported file. Can be displayed in the active function area
by selecting as the active function, if desired to be in a screen dump.
Key Path:
Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties
Remote Command: [:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:DESCription "text"
[:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:DESCription?
Example: :MPAD:CORR:CSET:DESC "11941A Antenna correction"
Notes: 45 chars max; may not fit on display if max chars used
Dependencies: This menu selection does not have any effect unless Input/Output, More, RF
Output & Test Set Config, Multiport Adapter, Multiport Adapter is set to the
On state.
Preset: Unaffected by a Preset. Set to empty by
Restore Input/Output Defaults
State Saved: Saved in instrument state.
Initial S/W Revision: A.10.00
Key Path:
Input/Output, RF Output & Test Set Config, Multiport Adapter,
Corrections, Properties
Remote Command: [:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:COMMent "text"
[:SENSe]:MPADapter:CORRection:CSET[1]|2|3|4|5|6|7|8|9|1
0|11|12|13|14|15|16:COMMent?
Example: :MPAD:CORR:CSET:COMM "this is a comment"
Notes: 45 chars max; may not fit on display if max chars used
Preset: Unaffected by Preset. Set to empty by
Restore Input/Output Defaults
State Saved: Saved in instrument state
Initial S/W Revision: A.10.00