Filter
Top Products
817
QPSK EVM Measurement
Peak Search
Next Pk Left
Moves the selected marker to the nearest peak to the left of the current marker that meets all enabled
peak criteria.
Marker Delta
Sets the control mode for the selected marker to Delta mode. This menu key performs the same function
as the Delta 1-of-N selection key in the Marker menu. It is duplicated in the Peak Search Menu to allow
you the convenience to simultaneously perform a peak search and change the marker control mode to
Delta without having to access two separate menus.
Pk-Pk Search
Finds and displays the amplitude and frequency (or time, if in zero span) differences between the highest
and lowest value on the y-axis.
Notes This command does not work when the selected marker is located on the polar
trace. In this case, the command is ignored.
Instrument S/W Revision Prior to A.02.00
Remote Command :CALCulate:EVMQpsk:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:M
AXimum:LEFT
Example CALC:EVMQ:MARK2:MAX:LEFT
Key Path
Peak Search
Mode WCDMA, C2K, 1xEVDO
Notes This command does not work when the selected marker is located on the polar
trace. In this case, the command is ignored.
Instrument S/W Revision Prior to A.02.00
Key Path
Peak Search
Instrument S/W Revision Prior to A.02.00
Remote Command :CALCulate:EVMQpsk:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:P
TPeak
Example CALC:EVMQ:MARK:PTP
Key Path
Peak Search
Mode WCDMA, C2K, 1xEVDO
Notes This command does not work when the selected marker is located on the polar
trace. In this case, the command is ignored.
Couplings This key is not available (key is grayed out) when
Coupled Markers is on.