126
About the Test Set
How the Test Set Is Used
E6607A/B
The RF I/O ports can also be used in a single direction, as in the case illustrated below, where RF I/O 1
serves as the input port, and RF Output serves as the output port.
E6607C
The MPA RFIO ports can also be used in a single direction, as in the case illustrated below. In this case,
the MPA RFIO 0-7 ports are paired and each pair is connected to a single DUT. In each pair, one serves
as the input port and the other serves as the output port. This provides for a total of 4 DUTs connected to
a single test set at the same time.