515
Spectrum Emission Mask Measurement
Meas Setup
Example: SEM:OFFS2:LIST:FREQ:STAR 2.515 MHz, 2.715 MHz, 3.515 MHz, 4.00
MHz, 8.00 MHz, 12.50 MHz
SEM:OFFS2:LIST:FREQ:STAR?
SEM:OFFS:LIST:STAT ON, ON, ON, OFF, OFF, OFF
SEM:OFFS:LIST:STAT?
Notes: Comma separated list of values.
OFFSet1 is for BTS, 2 for MS. Default is BTS.
You must be in the mode that includes SEM measurement to use this
command. Use :INSTrument:SELect to set the mode.
Couplings: Coupled to Stop Freq. Start cannot go above the stop freq less 100Hz.
Similarly Stop freq cannot go below Start Freq plus 100Hz.