Filter
Top Products
753
Modulation Accuracy (Composite Rho)
Meas Setup
function, alpha value of the Root Raised Cosine (RRC) filter, and chip rate.
EVM Result I/Q Offset
Toggles the I/Q origin offset function between Include (standard) and Exclude.
Include: The measurement results for EVM, Rho, and Modulation Accuracy (Rho) error take into
account the I/Q origin offset.
Exclude: The measurement results for EVM, Rho, and Modulation Accuracy (Rho) error do not take into
account the I/Q origin offset, and the message “EVM excludes I/Q Offset” is displayed in the lower
right-hand graph display area.
Turns the automatic mode On or Off, for the I/Q origin offset function.
Exclude: OFF – The measurement results for EVM and Rho do not take into account the I/Q origin
offset.
Include: ON – The measurement results for EVM and Rho take into account the I/Q origin offset.
Active Set Threshold
Toggles the active channel identification function between Auto and Man. If set to Auto, the active
channels are determined automatically by the internal algorithm. If set to Man, the active channel
identification is determined by a user definable threshold ranging from 0.00 to –100.00 dB.
Key Path Meas Setup
Mode cdma2000
Remote Command :CALCulate:RHO:IQOFfset:INCLude OFF|ON|0|1
:CALCulate:RHO:IQOFfset:INCLude?
Example CALC:RHO:IQOF:INCL ON
CALC:RHO:IQOF:INCL?
Preset ON
State Saved Saved in instrument state.
Range Include|Exclude
Key Path
Meas Setup, Advanced
Mode cdma2000
Remote Command :CALCulate:RHO:ASET:THReshold <rel_ampl>
:CALCulate:RHO:ASET:THReshold?
:CALCulate:RHO:ASET:THReshold:AUTO OFF|ON|0|1
:CALCulate:RHO:ASET:THReshold:AUTO?