Filter
Top Products
326
Channel Power Measurement
Marker
Marker
Accesses a menu that enables you to select, set up and control the markers for the current measurement.
Select Marker
Displays 12 markers available for selection.
Marker Type
Sets the marker control mode to Normal, Delta, Fixed or Off. All interactions and dependencies detailed
under the key description are enforced when the remote command is sent. If the selected marker is Off,
pressing Marker sets it to Normal and places it at the center of the screen on the trace determined by the
Marker Trace rules. At the same time, Marker X Axis Value appears on the Active Function area.
The default active function is the active function for the currently selected marker control mode. If the
current control mode is Off, there is no active function and the active function is turned off.
Key Path: Front-panel key
Initial S/W Revision: Prior to A.02.00
Key Path:
Marker
Initial S/W Revision: Prior to A.02.00
Key Path:
Marker
Mode: WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD, WLAN
Remote Command: :CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:M
ODE POSition|DELTa|OFF
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:M
ODE?
Example: CALC:CHP:MARK3:MODE POS
CALC:CHP:MARK3:MODE?
Notes: If the selected marker is Off, pressing Marker sets it to Normal and places it at
the center of the screen on the trace determined by the
Marker Trace rules. At
the same time,
Marker X Axis Value appears on the Active Function area.
Default Active Function: the active function for the selected marker’s current
control mode. If the current control mode is Off, there is no active function
and the active function is turned off.
Active Function Display: the marker X axis value entered in the active
function area displays the marker value to its full entered precision.
Preset: OFF