Filter
Top Products
11 85
Source (Internal)
completion and the next segment is played once.
Continuous
Selects Continuous as the trigger response for Segment Advance trigger type. With continuous selected, once a
trigger is received a segment is played continuously. When subsequent triggers are received, the currently playing
segment plays to completion and then the next segment is played continuously.
Trigger Source
Allows access to the trigger source sub-menus. The trigger source setting determines how the source
receives the trigger that starts the waveform playing. Therefore, this key is grayed out if the trigger type
is free run, since free run triggers immediately with no trigger source required.
Trigger Key
Sets the current trigger source to the front panel Trigger key. When Trigger Key is selected, the waveform is
triggered when you press the front panel Trigger key.
Bus
Sets the current trigger source to Bus. Selecting Bus trigger source enables triggering over GPIB, LAN, or USB
Key Path:
Source, Modulation Setup, ARB, Trigger Type, Segment Advance
Example: SOUR:RAD:ARB:TRIG:TYPE:SADV SING
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Trigger Type, Segment Advance
Example: SOUR:RAD:ARB:TRIG:TYPE:SADV CONT
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB
Remote Command: :SOURce:RADio:ARB:TRIGger[:SOURce] KEY|BUS|EXTernal2
:SOURce:RADio:ARB:TRIGger[:SOURce]?
Example: SOUR:RAD:ARB:TRIGger KEY
Dependencies: This key is grayed out if the current trigger type is Continuous, Free Run.
Preset: EXTernal2
Range: Trigger Key | Bus | External 2
Initial S/W Revision: A.05.00
Key Path:
Source, Modulation Setup, ARB, Trigger Source
Example: SOUR:RAD:ARB:TRIGger KEY
Initial S/W Revision: A.05.00