940
Input/Output
Correct Source
Sets the corrections for the RFIO1 port to be applied to the source.
Correct Analyzer
Sets the corrections for the RFIO1 port to be applied to the test set.
Correct Source and Analyzer
Sets the corrections for the RFIO1 port to be applied to both the source and the test set.
RFIO2
The port that the current corrections will be applied to. Pressing this key again allows the user access to the menu
for specifying which internal device the corrections for RFIO 2 will be applied to.
Example: :CORR:CSET:RF:PORT:RFIO1 BOTH
Preset: Both
State Saved: Saved in State
Key Path:
Input/Output, Corrections, Properties, RF Port
Example: :CORR:CSET:RF:PORT:RFIO1 SOUR
Readback: "Correct Source"
Key Path:
Input/Output, Corrections, Properties, RF Port
Example: :CORR:CSET:RF:PORT:RFIO1 ANAL
Readback: "Correct Analyzer"
Key Path:
Input/Output, Corrections, Properties, RF Port
Example: :CORR:CSET:RF:PORT:RFIO1 BOTH
Readback: "Correct Source and Analyzer"
Key Path:
Input/Output, Corrections, Properties, RF Port
Remote Command: [:SENSe]:CORRection:CSET[1]|2|3|4|5|6:RF:PORT:RFIO2
SOURce | ANALyzer | BOTH
[:SENSe]:CORRection:CSET[1]|2|3|4|5|6:RF:PORT:RFIO2?
Example: :CORR:CSET:RF:PORT:RFIO2 BOTH
Preset: Both
State Saved: Saved in State