Filter
Top Products
1398
View/Display
Graticule
Pressing Graticule turns the display graticule On or Off. It also turns the graticule y-axis annotation on
and off.
Display Line
Activates an adjustable horizontal line that is used as a visual reference line. The line’s vertical position
corresponds to its amplitude value. The value of the display line (for example, "–20.3 dBm") appears
above the line itself on the right side of the display in the appropriate font.
The display line can be adjusted using the step keys, knob, or numeric keypad. The unit of the Display
Line is determined by the Y axis unit setting under Amplitude. If more than one window has a display
line, the display line of the selected window is controlled.
If the display line is off the screen, it shows as a line at the top/bottom of the screen with an arrow
pointing up or down. As with all such lines (Pk Thresh, Trigger Level, etc.) it is drawn on top of all
traces.
The display line is unaffected by Auto Couple.
Example: The following commands clear the title and restore the measurement’s
original title:
DISP:ACP:ANN:TITL:DATA ""
This example is for ACP; the measurement name is required.
Notes: Uses the :DISPlay:<measurement>:ANNotation:TITLe:DATA <string>
command with an empty string.
Preset: Performed on Preset.
Initial S/W Revision: Prior to A.02.00
Key Path:
View/Display, Display
Remote Command: :DISPlay:WINDow[1]:TRACe:GRATicule:GRID[:STATe]
OFF|ON|0|1
:DISPlay:WINDow[1]:TRACe:GRATicule:GRID[:STATe]?
Example: DISP:WIND:TRAC:GRAT:GRID OFF
Notes: The graticule is the set of horizontal and vertical lines that make up the
grid/divisions for the x-axis and y-axis.
Preset: On
State Saved: saved in instrument state
Initial S/W Revision: Prior to A.02.00
Key Path:
View/Display, Display