Filter
Top Products
2.3.6
2 - 31
2.3.6.6 Capture Control
This block is used to capture images.
Fig. 2.3-15 Capture Control Unit
Captures an image with pre-specified image resolution and scanning speed.
Displayed figures on the capture button (the number 640 in the above example) indicates the
resolution of the captured image. Clicking Scan - Capture Setup, clicking the
button on the
Capture button, or right-clicking the Capture button brings up a Setup window, as shown below,
on which you can set a scanning speed and a resolution level for the capturing process:
Fig. 2.3-16 Capture Control Unit
The capturing process runs in two modes: one in which capturing conditions can be set
according to the capturing speed currently in effect (with the Scan Speed Link check ON) or
one in which capturing is conducted at fixed conditions, irrespective of the scanning speed (with
the Scan Speed Link check OFF).