Filter
Top Products
2.3 Graphical User Interface (GUI)
2 - 56
(3) LINE PROFILE SIGNAL Window
The signal for line profile can be selected independently from the signal for image.
For example, you can observe or take a photograph of an X-ray intensity line profile on the
secondary electron image. Select a signal for the line profile in the box.
When the Image is selected in the Background select buttons, the line profile is overlaid on
the image. When the Black is selected, only the line profile is shown on the screen.
2.3.9.3 Record Tab
Fig. 2.3-42 Setup Window – Image Recording Tab
(1) AUTO DATA DISPLAY Window
(a) Auto Data Display
Auto data display is engaged when this box is checked.
(b) Magnification to Time and Signal, Name and Vacuum checkboxes
These items are included in data display if checked.
(c) Data Number input box
Input data number into this box. Up to ten characters may be keyed in. Do not use ","
(comma) or " " (space).
If the Auto Increment check box is checked and the Data Number has "-nn" at its end
(n : numerals, for example "Hitachi-00" ), Data Number is incremented with each
successive photographing.