Filter
Top Products
2.3 Graphical User Interface (GUI)
2 - 64
2.3.17 Save Image Dialog Window
The Save Image dialog window is used for saving scanning images or captured images.
To save scanning images, use the Direct Save button on the Control Panel. Use the save
button on the Captured Image window to save captured images.
Fig. 2.3-50 Image Save Window
See <3.6.4 Saving a Scanning Image (Direct Save)>.
See <3.6.5 Saving Captured Images>.
NOTICE: The SDM Register check box should be checked if you wish to automatically register
saved images to the SEM Data manager database. Remove the check when
registration is not necessary, for example when the PCI is be used for data archiving.
2.3.18 Opt Signal Processing Dialog Window
The Opt Signal Processing dialog window is used to apply analog processing to signals of an
optional detector.
Fig. 2.3-51 Optional Signal Setting Window
Refer to <3.9.5 Signal Processing>.