Filter
Top Products
3.11 Using SEM Data Manager
3 - 176
(a) Color Mode and Color Order
• Off : No coloring
• Color1 or Color2
Convert gray scale value to RGB color as in the following figures.
The L, M and H represent R, G or B color specified by Color Order setting.
Color 1 mode Color 2 mode
Fig. 3.11-13 Signal/Color Intensity
For example when Color Order is set to B-G-R and Color Mode to Color1, L, M and H
represent B, G and R color and results in a pseudo color image where original dark area
is blue and bright area is red.
• Slice 4/8/16
Slices full grayscale range to 4, 8 or 16 levels and specifies colors for each separated
level.
(b) Max and Min Level
Adjust minimum and maximum of gray scale range to be converted to color image.
(c) Color bar
The color bar shows relation of colors to original brightness level when checked.
NOTICE: Pseudo color conversion is available for images of 2560 × 1920 pixels or smaller.
M
L L M
H
H
M
L
M
H
Intensity Intensity