Filter
Top Products
3.5 Operation for Image Observation
3 - 70
(7) R axis continuous driving
On the rectangles of the R axis tool, mouse pointer will be changed as shown below.
Fig. 3.5-42 R-axis Moving Tool (continuous move)
Press down the left button on one of the rectangles. Stage will be rotated continuously
while holding the button down. On the right side rectangle, stage rotates clockwise, and on
the left side, counterclockwise.
The eucentric rotation function is not effective when using this selection.
(8) Z-axis operation to a specified coordinate
On the circle of the Z-axis tool, mouse pointer will be changed as shown below.
Fig. 3.5-43 Z-axis Moving Tool (coordinates specification)
Press down the left button and move the mouse up or downward while holding down the
button. The circle moves following the mouse and the Z-axis value is shown in the indicator
box. Then release the button. Stage will go to the Z position specified in the indicator box.
The change of Z is limited to a range allowable for the present Tilt angle.