Filter
Top Products
6.3.2
6 - 17
6.3.2.2 Acceleration Voltage
(1) Monitoring/Setting of Acceleration voltage
Property
HV ON/OFF monitoring
HVOn as Long Read Only
0: HV–OFF
1: HV-ON
Acceleration voltage monitoring
Vacc as Long Read Only
0: HV–OFF
300 to 30000 : 0.3 – 30.0 (kV)
Method
HV ON/OFF setting
SetHVOn (HVON as Long) as Long
HVON 0: HV-OFF 1: HV-ON
Return 0: Normal receiving
Excluding 0: Abnormal receiving
Comment: The method is finished at completion of
command analysis.
The completion of acceleration voltage
setting is notified by the HVOnFinished event.
If the return value is not 0, the HVOnFinished
event is not issued.
Please do not use other method until
receiving the HVOnFinished event.