Filter
Top Products
APPENDIX - 2
Code Message Text Explanation and Countermeasure
*2032 Timeout error. This message will be shown when operations such as auto
focusing did not end within specified period. If it happens
frequently, contact a service engineer.
2034 Rotate R-axis with 90 degree
pitches.
The rotation angle is limited to only 90 deg steps.
*2035 Failed in the capture. Image capturing failed. If the error is repeated, contact a
service engineer.
2036 Image Processing is not applied
for the selected Capture
resolution.
Image Processing function on the operation panel is
applicable to 1280 × 960 pixels or smaller capture size.
Capturing will be performed without processing when you
click OK button.
*2040 This is not 8 bits image file. Some commands in the SEM Data Manager handle 8 bit
gray scale images only.
*2041 The size of image exceeds the
maximum resolution 2560x1920.
2042 The size of image exceeds the
maximum resolution 2560x1920.
2044 The size of image exceeds the
maximum resolution 2560x1920.
SEM Data Manager has some restrictions on image size,
depending on the type of processing required.
2049 Start Password locking of
Windows. Scan mode and scan
speed will be set to Normal,
Slow1 when Windows is
unlocked.
You need a password for
Windows logon to unlock.
Before performing password locking, this message should
be checked. If password locking interferes with operation, it
should be canceled.
*2060 Insufficient memory space in a
temporary drive.
At least 400MB free area is
necessary for startup.
*2061 Insufficient memory space in a
temporary drive.
At least 20MB free area is
necessary for executing this
process.
*2062 Insufficient memory space in a
temporary drive.
At least 10MB free area is
necessary for executing this
process.
*2063 Insufficient memory space in a
temporary drive.
At least 1MB free area is
necessary for executing this
process.
2065 Free space in temporary drive is
30MB or less. System may
become unstable.
Please quit PC-SEM program
and free up the disk space.
These messages will be shown when vacant area of the
hard disk is not enough for the process to be executed.
Delete unnecessary files and allow more space than
specified.