Filter
Top Products
For Safe Handling
SAFETY - 2
General Precautions on Safety
Before Using the System
■ Before using this product, read the operating manual careful and
be sure to understand its contents.
■ The operating manual should be kept in a safe place near you for
ready access and reference.
■ The system should be handled according to the procedures given
in this manual.
■ Be sure to understand the safety-related instructions provided in
this manual and heed them.
■ Be sure to observe the precautions indicated on the system or in
the manual. Failure to heed such precautions can result in
equipment damage or bodily injury.
■ Be sure to observe the operating instructions on the product itself
and those provided in its operating manual.
■ Do not carry out modification of the instrument, parts
replacement, use non-specified parts, nor detach safety
mechanisms since this could be hazardous.
■ Do not perform any operation or action in any way other than as
provided in this manual. When in doubt, call the designated field
engineer.
■ The customer is responsible for proper ventilation of the room
when using chemicals. Inadequate ventilation could cause a
health hazard.
■ Most system operations are performed by viewing the monitor.
Looking at the monitor continuously for long hours can cause
fatigue-related eye problems. For the safe system operation
involving the use of display devices, adequate labor management
standards should be established and implemented.
■ Keep in mind that the hazard warnings in this manual or on the
machine cannot cover every possible case, as it is impossible to
predict and evaluate all circumstances beforehand. Be alert and
use your common sense.
The above instructions should be observed strictly. Failure to do so
can result not only in improper specimen observation and evaluation,
but also in bodily injury.