Filter
Top Products
2.3.3
2 - 17
2.3.3 Control Arrangement on the Window
Operation tools are placed as follows.
(1) Control panel
Most frequently used controls are placed on it.
(2) Operation panel
The Operation Panel is comprised of four tabs: Cond., Image, Utility, and Stage.
• < Cond tab >
Scanning controls, and electron optical column controls are placed on it.
• < Image tab >
Principally controls related to image size and detector settings are provided.
• < Stage tab >
It has stage operation controls for type II model.
• < Utility tab >
Optional function controls are placed here.
Functions to be placed on Cond and Image, Utility tabs can be customized.
To change control arrangement, open Operation Panel dialog window by Optional setup
command in Option menu.
Also up to eight tool buttons can be placed on the tool button area (lower part of Operation
panel).
Refer to <3.9.14 Optional Setting >.
(3) Menu bar
Most functions are executed on the menu bar.
(4) Mouse operation on the scanning image
The types of operations that can be performed on the image switch when appropriate modes
are selected from the Mouse Mode on the Option menu or from the Mouse Mode of the
pop-up menu that comes up when the mouse wheel button is clicked on the image.
• < Image adjustment >
Focusing, astigmatism correction and brightness/contrast adjustment
• < Stage operation > (Only Type II stage)
X/Y operation as with joystick, R, Z, T (Coordinates specification and continuous
movement), RISM
• < Image shift >
(5) Popup menu
Clicking the wheel button of mouse shows a popup menu.