Filter
Top Products
2.3.4
2 - 21
• Scan Mode: Selects the size of scanning image display (Screen
mode) from Full, Dual and Small.
Refer to <3.9.1 Screen Mode>.
(6) Image menu: The Image menu includes commands for signal processing of optional
detectors.
• Opt. Signal Processing: Opens the Opt Signal Processing dialog window.
Refer to <3.9.5 Signal Processing>.
• Show Histogram: Displays a histogram of the image being observed.
See <3.5.4 Image Brightness and Contrast Adjustment>.
(7) Analysis menu: The Analysis menu includes commands for analysis modes,
measurement and others.
• Normal: Sets to Normal mode (image observation).
• Line Analysis: Selects Line analysis 1 and 2 mode alternately.
Refer to <3.9.4 X-ray Analysis Mode>.
• Spot Analysis: Selects Spot 1 and 2 mode alternately.
Refer to <3.9.4 X-ray Analysis Mode>.
• Area Analysis: Selects Area analysis 1 and 2 mode alternately.
Refer to <3.9.4 X-ray Analysis Mode>.
• Oblique: Opens Oblique image window and displays bird's-eye view of
viewing images.
Refer to <3.9.13 Oblique Image>.
• CD Measurement: If the CD-Measurement option is installed, the CD Measurement
dialog window is brought up.
(8) Option menu: The Option menu includes commands for optional functions.
• Optional Setup - Op. Panel Setting: Opens Op. Panel tab of the Optional Setup
dialog window.
Use for arrangement of functions on the
Operation Panel.
Refer to <3.9.14 Optional Setting>.
• Optional Setup - Stage: Opens Stage tab of the Optional Setup dialog
window.
Use for setting parameters of stage control
function. Enabled in Type II.
Refer to <3.9.14 Optional Setting>.