Filter
Top Products
3.6.3
3 - 101
(3) Image Capture
To start Image Capture, click the Capture
button on the Control panel. Image
capture can be started either in RUN or FREEZE status.
(4) Displaying a captured image
After the scanning is finished, the Captured Image window opens and the captured image
is added in the list as a thumbnail.
Fig. 3.6-4 Captured Image List Window
The Captured Image window opens by Captured button on the tool button area of the
Operation panel, Captured Image command in the Window menu and the shortcut Ctrl - L at
any time.
Refer to <2.3.10 Captured Image Window>.