Filter
Top Products
2.3 Graphical User Interface (GUI)
2 - 20
• Filament Image: Displays the Filament Image window.
This button is used to perform appropriate image
adjustments using a filament image. Normally this
function is not used by customers.
• Image Adjustment: Displays the Image Adjustment window.
This button permits the performance of basic adjustment
operations, such as focusing and stigma compensation.
• ABCC: Executes automatic brightness and contrast control.
Refer to <3.5.4 Image Brightness and Contrast
Adjustment>.
• Auto Focus: Executes automatic focusing.
Refer to <3.5.5 Focus and Astigmatism Correction>.
• Auto Stigma and Focus: Executes automatic astigmatism correction and focusing.
Refer to <3.5.5 Focus and Astigmatism Correction>.
• Assignment Auto Buttons: These buttons assign buttons to the Auto Function area
on the Control Panel.
• Focus Monitor: Starts Focus Monitor mode.
Refer to <3.5.5 Focus and Astigmatism Correction>.
• BC Monitor: Starts BC Monitor mode.
Refer to <3.5.4 Image Brightness and Contrast
Adjustment>.
• Dynamic Stigma Monitor: Starts up the Dynamic Stigma Monitor.
• DeGauss: Degausses the objective lens.
(5) Scan menu: The Scan menu includes commands for scanning control.
• Run (Freeze): Runs or freezes scanning alternately.
• Capture: Starts image capture.
Refer to <3.6.3 Image Capture>.
• Capture Setup: During the image capture operation, this button can be
used to specify an image size (in pixels) and scanning.
• Split DM Mode: Activates Split/Dual Mag mode.
Refer to <3.9.2 Split Screen and Dual Mag Mode>.
• Scan Speed: Selects scanning speed.
Refer to <3.5.3 Selecting Scanning Speed>.
• Assignment Speed Buttons: These buttons assign scanning speeds to the scan
speed buttons. Twelve speeds can be assigned to four
buttons.
See <3.5.3 Selecting Scanning Speed>.