Filter
Top Products
2.3 Graphical User Interface (GUI)
2 - 44
2.3.7.7 DETECTOR Window
This window switches and controls detectors.
Fig. 2.3-31 DETECTOR Window
(1) Detector selection control
This control switches detectors.
(2) ABCC link check box
If this box is checked, switching detectors automatically executes ABCC.
With the BSE selected, switching the BSE mode or modifying gains also automatically
executes ABCC.
(3) Detector-only control area
If a detector-only control selected on the DETECTOR control is available, the control is
displayed in this area. The figure above indicates the situation where a BSE detector is
selected.
2.3.7.8 IMAGE SHIFT Window
Indicates the present value of image shift with yellow cross mark.
Clicking the Reset resets image shift at the mid-point of the movable range.
Fig. 2.3-32 IMAGE SHIFT Window
Detector selection control
ABCC link check box
Detector control area