Filter
Top Products
4 - 13
4. SYSTEM STARTUP
4.5.6 Sensor input option setting
External signal (sensor) is connected by setting sensor input options (parameter No.0219).
Parameter
No.
Abbreviation Name Initial Value Units
Setting
range
Function
0219 *SOP Sensor input
options
0000h
0000h to
0304h
0
Sensor input system
Set the input system of the sensor
(LSP, LSN, DOG).
0: Not use
1: Driver input
2: Digital input
3: Not connected (does not detect
LSP, LSN, DOG)
4: Dual port memory input
Limit switch signal selection
Set valid / invalid of limit switch.
0: LSP/LSN are valid
1: LSP is valid, LSN is invalid
2: LSP is invalid, LSN is valid
3: LSP/LSN are invalid
0
021A *SLSP Sensor
signal (LSP)
connection
specification
0000h
0000 to
3FF1h
Digital input assignment
Set valid/invalid for the digital input
assignment where LSP is
connected.
0: Not assigned
1: Assigned
Digital input number assignment
Set the digital input number where
the LSP is connected.
000h to 3FFh: DI_000 to DI_3FF
021B *SLSN Sensor
signal (LSN)
connection
specification
0000h
0000 to
3FF1h
Digital input assignment
Set valid/invalid for the digital input
assignment where LSN is
connected.
0: Not assigned
1: Assigned
Digital input number assignment
Set the digital input number where
LSN is connected.
000h to 3FFh: DI_000 to DI_3FF
021C *SDOG Sensor
signal (DOG)
connection
specification
0000h
0000 to
3FF1h
Digital input assignment
Set valid/invalid for the digital input
assignment where DOG is
connected.
0: Not assigned
1: Assigned
Digital input number assignment
Set the digital input number where
DOG is connected.
000h to 3FFh: DI_000 to DI_3FF