Filter
Top Products
12 - 15
12. MONITOR NUMBER
Monitor No. Content Units Remarks
0520
Servo parameter error number (Note)
No. 1200 to 120F
Bit corresponding to parameter number is turned on.
bit is No. 1200 (bit 0) to 120F (bit 15).
0521
Servo parameter error number (Note)
No. 1210 to 121F
Bit corresponding to parameter number is turned on.
bit is No. 1210 (bit 0) to 121F (bit 15).
0522
Servo parameter error number (Note)
No. 1220 to 122F
Bit corresponding to parameter number is turned on.
bit is No. 1220 (bit 0) to 122F (bit 15).
0523
Servo parameter error number (Note)
No. 1230 to 123F
Bit corresponding to parameter number is turned on.
bit is No. 1230 (bit 0) to 123F (bit 15).
0524
Servo parameter error number (Note)
No. 1240 to 124F
Bit corresponding to parameter number is turned on.
bit is No. 1240 (bit 0) to 124F (bit 15).
0525
Servo parameter error number (Note)
No. 1250 to 125F
Bit corresponding to parameter number is turned on.
bit is No. 1250 (bit 0) to 125F (bit 15).
0526
Servo parameter error number (Note)
No. 1260 to 126F
Bit corresponding to parameter number is turned on.
bit is No. 1260 (bit 0) to 126F (bit 15).
0527
Servo parameter error number (Note)
No. 1270 to 127F
Bit corresponding to parameter number is turned on.
bit is No. 1270 (bit 0) to 127F (bit 15).
0528
Servo parameter error number (Note)
No. 1280 to 128F
Bit corresponding to parameter number is turned on.
bit is No. 1280 (bit 0) to 128F (bit 15).
0529
Servo parameter error number (Note)
No. 1290 to 129F
Bit corresponding to parameter number is turned on.
bit is No. 1290 (bit 0) to 129F (bit 15).
052A
Servo parameter error number (Note)
No. 12A0 to 12AF
Bit corresponding to parameter number is turned on.
bit is No. 12A0 (bit 0) to 12AF (bit 15).
052B
Servo parameter error number (Note)
No. 12B0 to 12BF
Bit corresponding to parameter number is turned on.
bit is No. 12B0 (bit 0) to 12BF (bit 15).
052C
Servo parameter error number (Note)
No. 12C0 to 12CF
Bit corresponding to parameter number is turned on.
bit is No. 12C0 (bit 0) to 12CF (bit 15).
052D
Servo parameter error number (Note)
No. 12D0 to 12DF
Bit corresponding to parameter number is turned on.
bit is No. 12D0 (bit 0) to 12DF (bit 15).
052E
Servo parameter error number (Note)
No. 12E0 to 12EF
Bit corresponding to parameter number is turned on.
bit is No. 12E0 (bit 0) to 12EF (bit 15).
052F
Servo parameter error number (Note)
No. 12F0 to 12FF
Bit corresponding to parameter number is turned on.
bit is No. 12F0 (bit 0) to 12FF (bit 15).
Note. Information concerning parameter error (servo alarm 37) that has occurred at system startup can be monitored. If a parameter
warning (servo alarm E4) occurs while system is running, it is not reflected in this information.