Filter
Top Products
7 - 46
7. AUXILIARY FUNCTION
7.12.4 Sampling setting write/read
The conditions for sampling and contents of sampling can be set. Also, the current sampling setting can be
read. The sampling setting write/read is valid after executing parameter initialization (system command code:
0003h).
(1) When writing the sampling setting
sscSetSamplingParameter function
Valid data 2Valid data 1
Sampling setting
write command
(SMPSW)
Sampling setting
write number
Sampling setting
write data
Sampling setting
write data
(answerback)
Sampling setting
write complete
(SWFIN)
Sampling setting
write number
(answerback)
Valid data 2Valid data 1
Valid data 2Valid data 1
Valid data 2Valid data 1
POINT
The sampling setting write data is written in 4 bytes.
(2) When reading the sampling setting
Sampling setting
read command
(SMPSR)
Sampling setting
read number
Sampling setting
read complete
(SRFIN)
Sampling setting
read number
(answerback)
Sampling setting
read data
Valid data 2Valid data 1
Valid data 2Valid data 1
Valid data 2Valid data 1
sscGetSamplingParameter function
POINT
The sampling setting read data is read in 4 bytes.