Filter
Top Products
12 - 16
12. MONITOR NUMBER
Monitor No. Content Units Remarks
0530
Servo parameter error number (Note)
No. 1300 to 130F
Bit corresponding to parameter number is turned on.
bit is No. 1300 (bit 0) to 130F (bit 15).
0531
Servo parameter error number (Note)
No. 1310 to 131F
Bit corresponding to parameter number is turned on.
bit is No. 1310 (bit 0) to 131F (bit 15).
0532
Servo parameter error number (Note)
No. 1320 to 132F
Bit corresponding to parameter number is turned on.
bit is No. 1320 (bit 0) to 132F (bit 15).
0533
Servo parameter error number (Note)
No. 1330 to 133F
Bit corresponding to parameter number is turned on.
bit is No. 1330 (bit 0) to 133F (bit 15).
0534
Servo parameter error number (Note)
No. 1340 to 134F
Bit corresponding to parameter number is turned on.
bit is No. 1340 (bit 0) to 134F (bit 15).
0535
Servo parameter error number (Note)
No. 1350 to 135F
Bit corresponding to parameter number is turned on.
bit is No. 1350 (bit 0) to 135F (bit 15).
0536
Servo parameter error number (Note)
No. 1360 to 136F
Bit corresponding to parameter number is turned on.
bit is No. 1360 (bit 0) to 136F (bit 15).
0537
Servo parameter error number (Note)
No. 1370 to 137F
Bit corresponding to parameter number is turned on.
bit is No. 1370 (bit 0) to 137F (bit 15).
0538
:
Reserved
054F
Note. Information concerning parameter error (servo alarm 37) that has occurred at system startup can be monitored. If a parameter
warning (servo alarm E4) occurs while system is running, it is not reflected in this information.