Filter
Top Products
3 - 6
3. INSTALLATION AND WIRING
3.2.2 Forced stop input cable
(1) Precautions for handling the forced stop input cable
• For connection or removal of the forced stop input cable, do it surely while holding a connector of forced
stop input cable.
Position board
Tab
(2) Connection of the forced stop input cable
• For connection of a forced stop input cable to the position board, connect it surely to an EMI connector of
position board while holding a connector. Be sure to insert it until it clicks.
(3) Removal of the forced stop input cable
• For removal of the forced stop input cable, push a tab and pull out the cable while holding a connector.
POINT
The following handling will damage the position board or forced stop input
cable.
• Forced removal of the forced stop input cable from the position board.
• The forced stop input cable is twined other cables.
• Excessive power is applied at cable laying.
Wire the cable correctly.