Mitsubishi Electronics MR-MC210 Sleep Apnea Machine User Manual


 
6 - 62
6. APPLICATION FUNCTIONS
(2) Other axes start data
For the other axes start data (1 to 32), set the conditions for starting other axes (start conditions) and the
operation (operation content) performed when the condition is satisfied. When the other axes start No. (1 to
32) is set to the other axes start specification (other axes start specification 1 and 2) of the point table, other
axes are started according to the settings of the corresponding other axes start data.
Other axes start data table
E100 Other axes start
data 1
Start condition E780 Other axes start
data 17
Start condition
Operation content Operation content
E168 Other axes start
data 2
Start condition E7E8 Other axes start
data 18
Start condition
Operation content Operation content
E1D0 Other axes start
data 3
Start condition E850 Other axes start
data 19
Start condition
Operation content Operation content
E238 Other axes start
data 4
Start condition E8B8 Other axes start
data 20
Start condition
Operation content Operation content
E2A0 Other axes start
data 5
Start condition E920 Other axes start
data 21
Start condition
Operation content Operation content
E308 Other axes start
data 6
Start condition E988 Other axes start
data 22
Start condition
Operation content Operation content
E370 Other axes start
data 7
Start condition E9F0 Other axes start
data 23
Start condition
Operation content Operation content
E3D8 Other axes start
data 8
Start condition EA58 Other axes start
data 24
Start condition
Operation content Operation content
E440 Other axes start
data 9
Start condition EAC0 Other axes start
data 25
Start condition
Operation content Operation content
E4A8 Other axes start
data 10
Start condition EB28 Other axes start
data 26
Start condition
Operation content Operation content
E510 Other axes start
data 11
Start condition EB90 Other axes start
data 27
Start condition
Operation content Operation content
E578 Other axes start
data 12
Start condition EBF8 Other axes start
data 28
Start condition
Operation content Operation content
E5E0 Other axes start
data 13
Start condition EC60 Other axes start
data 29
Start condition
Operation content Operation content
E648 Other axes start
data 14
Start condition ECC8 Other axes start
data 30
Start condition
Operation content Operation content
E6B0 Other axes start
data 15
Start condition ED30 Other axes start
data 31
Start condition
Operation content Operation content
E718 Other axes start
data 16
Start condition ED98 Other axes start
data 32
Start condition
Operation content Operation content
POINT
All axes start data specified in the other axes start specification of the point
table upon start of operation are imported. When the other axes start data is
changed after the start operation (after the other axes start notice signal
(OSOP
) is turned on) the changes will be invalid.
API LIBRARY
Use the sscSetOtherAxisStartData/sscGetOtherAxisStartData functions to
set/get other axes start data.