Mitsubishi Electronics MR-MC210 Sleep Apnea Machine User Manual


 
6 - 67
6. APPLICATION FUNCTIONS
Other axes start command Other axes start status
Address Bit Abbreviation Signal name Address Bit Abbreviation Signal name
E080 0 OSSTP Other axes start cancel E082 0 OSOP Other axes start notice
1
Reserved
1 OSFIN
Other axes start complete
2 2 OSERR Other axes start incomplete
3 3
Reserved
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
Note 1. The addresses in the table above are the addresses for the other axes start command/status table 1. For the other axes data 2
and above, increase in units of 4h for each axis.
Note 2.
: Other axes start No.
API LIBRARY
Use the sscOtherAxisStartAbortOn or sscOtherAxisStartAbortOff functions to
turn ON/OFF the other axes start cancel command (OSSTP).
Use the sscGetOtherAxisStartStatus function to check if the following other
axes start statuses are ON/OFF.
Other axes start notice (OSOP )
Other axes start complete (OSFIN )
Other axes start incompletion (OSERR )
(a) Details concerning other axes start command bits
Abbreviation Signal name Function details
OSSTP Other axes start cancel [Function]
Cancels the other axes start.
[Operation]
Turn on this signal to cancel the other axes start when the other axes start notice
signal (OSOP
) is on for waiting for the other axes start condition satisfaction.