Filter
Top Products
7 - 86
7. AUXILIARY FUNCTION
(59) Mark detection setting enable
Offset Content
0000h Axis number
0002h Event code (0B04h)
0004h Time stamp
0006h
0008h Mark detection setting number
000Ah 0 (fixed value)
000Ch 0 (fixed value)
000Eh 0 (fixed value)
POINT
For change of parameters (event code 0202h), the parameter value prior to
change and parameter value after change are compared and only if the
setting is different is the parameter change recorded in the log data.
For occurrence of system errors (event code 0311h), occurrence of system
errors related to communication (E400h to) are recorded in the log data.
However system errors that show issues with the position board (E001h to
E302h) are not recorded in the log data, as the position board is in an error
state.