Filter
Top Products
6 - 93
6. APPLICATION FUNCTIONS
(4) Axis command/axis status bit
The axis status bits related to the pass position interrupt function are shown below.
(a) Axis command bit
Address Bit Abbreviation Signal name
1007 0 PPISTP Pass position interrupt cancel
1
Reserved
2
3
4
5
6
7
Note. The above address is the address for the axis 1. For the axis 2 and
above, increase in units of C0h for each axis.
(b) Axis status bit
Address Bit Abbreviation Signal name
1067
0 PPIOP Pass position interrupt
1 PPIFIN Pass position interrupt complete
2 PPIERR
Pass position interrupt
incomplete
3
Reserved
4
5
6
7
Note. The above address is the address for the axis 1. For the axis 2 and
above, increase in units of C0h for each axis.
(c) Details on axis command bit
Abbreviation Signal name Function details
PPISTP Pass position interrupt
cancel
[Function]
Cancels the pass position interrupt.
[Operation]
Turn on this signal to cancel the pass position interrupt when the pass position interrupt
signal (PPIOP) is on.