Filter
Top Products
Index-10 800 Series Operator's Manual
reference sensor internal electrode (illustration),
3-78
reservoir cap from reference sensor (illustration),
3-70
sample ground/temperature sensor (illustration),
3-49
replacing
glucose and lactate biosensors, 3-86 to 3-89
measurement sensors, 3-83 to 3-86
reference sensor, 3-71 to 3-74
reference sensor cassette, 3-74 to 3-76
reference sensor internal reference electrode, 3-77
to 3-80
sample ground/temperature sensor, 3-83 to 3-86
sample ground/temperature sensor, installation
position, 3-88
troubleshooting, 4-107
sequences, 1-58 to 1-74
one-point calibration, 1-64 to 1-74
syringe sample, 1-59 to 1-74
two-point calibration, 1-68 to 1-74
wash, 1-62 to 1-74
service
setup information, 5-66
under warranty, B-4 to B-7
service telephone number, 5-5
Set Passwords Screen, 5-30
security setup
menu options password, 5-29 to 5-30
password protection, 5-26 to 5-27
operator passwords. See defining passwords
supervisor password, 5-29 to 5-30
setting up the system
beeper volume, 5-36
capillary sample movement, 5-37
correlation coefficients, defining, 5-42
date and time, 5-31 to 5-32
keys used, 5-4
menu options password, 5-29 to 5-30
overview, 5-3 to 5-19
paper spool, 5-25
parameter names, 5-16
parameter panels, 5-10
parameter resolution, 5-39
parameter units, 5-13
parameter values, 5-15
parameters analyzed, 5-12
password protection, 5-26 to 5-27
operator passwords, 5-27 to 5-29
Patient Information form, 5-6 to 5-8
printer report format, 5-22
printing options, 5-20 to 5-21
reference and action ranges, 5-17
reporting results with calibration drift, 5-40
roll printer, 5-24
setup report, printing, 5-44
supevisor password, 5-29 to 5-30
system information, 5-5
transmission of patient results to an LIS, HIS, or
data management system, 5-38
setup report, printing, 5-44
shutting the system down, H-15
site requirements, H-1
Size of patient sample database, 5-35
Slope Gas, 1-44
composition, 3-92
sodium
measuring, I-15
sensor, I-15
sodium hypochlorite, 3-8
software
Analyze mode, 1-28
F-keys, 1-26
installing, 5-76 to 5-79
Main Menu, 1-29
menu codes, 1-31
menu map, 1-30
Menu mode, 1-29
screen elements, 1-27
system keys, 1-24
specifications, system (table), H-1
standby, placing the system in, 5-83
Status Event Log, 4-5
Status Event Log Report (illustration), 4-5
stopping the system, 3-63
SulfHb > 1.5% message, 4-9
sulfhemoglobin (SulfHb), measurement principles,
I-23
supervisor password
default, 5-26, 5-27, 5-29, 5-30
defining, 5-29 to 5-30
supplies, list with part numbers and descriptions, B-8
syringes, using, 1-35, 2-3
system fuses, replacing (illustration), 3-106
System Information screen, 5-6
system information, viewing, 5-5
system keys, 1-24
system messages, 4-5, 4-6 to 4-10
troubleshooting, 4-114
System Options screen, 5-33, 5-35, 5-36, 5-37 to 5-39,
5-40 to 5-43
system specifications, E-2
system specifications (table), H-1