Filter
Top Products
System Administration 5Ć55
5. Define another setup function or press Exit Menu to return to the Ready
screen.
Use this procedure to control transmission of QC results directly to an LIS or data
management system. This option is available only if your 800 system is connected
to an LIS or data management system. Refer to Defining Automatic Transmission
of Results, page 5-38, for the procedure to define patient sample auto send.
On The system automatically transmits QC results to an LIS or data management
system. The default setting is On.
Off Results are not automatically transmitted. The operator must press Send to
transmit results or press
Do Not Send to prevent transmission.
1. Access the Systems Options screen from the Menu screen:
a. Select
6 System Setup and press Enter.
b. Select 5 Systems Options and press Enter.
The Systems Options screen appears, as shown in Figure 5-33.
2. Move to the Auto Send frame.
3. Select
QC and press Enter. A dark box indicates the option is on.
4. Press
Done.
5. You can define another setup function or press
Exit Menu to return to the
Ready screen.