Filter
Top Products
System Administration 5Ć37
Use this procedure to control the way the system moves capillary samples to the
measurement module. You can choose to move the samples manually or to have
the system move them automatically.
Yes The system moves capillary samples automatically to the measurement
module. The default value is Yes.
No The operator moves capillary samples to the measurement module by
turning the sample pump.
1. Access the System Options screen from the Menu screen:
a. Press
6 System Setup and press Enter.
b. Press 5 Systems Options and press Enter.
The System Options screen appears, as shown in Figure 5-22.
2. Move to the Auto Move Capillary frame.
3. Select
Yes or No and press Enter.
4. Press
Done.
5. Define another setup function or press
Exit Menu to return to the Ready
screen.