Filter
Top Products
800 Series Operator's Manual5Ć38
Use this procedure to select automatic transmission of patient sample results
directly to an LIS, HIS, or data management system. You can use this option only
if your 800 system is connected to an LIS or data management system. Refer to
Selecting Automatic Transmission of QC Results, page 5-55, for the procedure to
define auto send for QC results.
On The system automatically sends patient sample results to an LIS or data
management system. The default setting is On.
Off Results are not automatically transmitted. The operator must press Send to
transmit results or press
Do Not Send to prevent transmission of results.
1. Access the Systems Options screen from the Menu screen:
a. Select 6 System Setup and press Enter.
b. Select 5 Systems Options and press Enter.
The System Options screen appears, as shown in Figure 5-23.
2. Move to the Auto Send frame.
3. Select
Patient and press Enter.
A dark box indicates the option is on.
4. Press
Done.
5. You can define another setup function or press
Exit Menu to return to the
Ready screen.