Filter
Top Products
1Ć29
Learning About the System
Using the Menu Mode
The Menu mode lets you perform infrequently required functions. You access the
Menu mode by pressing Menu. The system displays the Menu screen with the first
option in the Main Menu highlighted.
Use the arrow keys to move up and down a menu to highlight the option you want.
As you highlight an option in the Main Menu, another menu appears to the right.
This menu lets you preview the options available on the next menu. The preview
menu helps you locate the next menu option
you want.
You move to the next menu by pressing the right arrow key or by pressing Enter.
Again use the arrow keys to select the menu option you want. If dots (. . .) appear
after the option, another menu exists for that option. If no dots appear after the
option, the screen associated with the option appears when you press Enter. The
following screen shows three levels of menus on the Menu screen:
Press Exit Menu to return
to the Analyze mode.
Dots after a menu option
indicate that another menu
follows the option.
The system automatically returns to the Ready screen if you do not press a key for
at least 5 minutes. If you are using a troubleshooting menu option, the period of
time before the system returns to the Ready screen extends to 30 minutes. The
system does not automatically return to the ready screen when you access
maintenance options.
Figure 1-11 shows a map identifying all the menu options available in the Menu
mode. Menu options that are not available appear in lighter text on the screen.