Filter
Top Products
2Ć35
Operating the System
Use this procedure to recall patient sample data and results stored in the system.
When the system locates patient sample data, you can edit data, print reports, and
transmit the data to an LIS or a data management system.
1. Access the Patient Data Search Criteria screen from the Menu screen:
a. Select
4 Data Recall and press Enter.
b. Select 1 Patient Data and press Enter.
The Patient Data Search Criteria screen appears, as shown in Figure 2-19.
NOTE:ĄĂThe Analysis Date fields contain the current day’s date. If you do not
complete any other fields, the system recalls all patient samples for this day.
Use this screen to enter the criteria that you want the system to use to search
for patient sample data. The system locates only the samples that meet all the
criteria you specify. For example, if you enter a patient ID, the system searches
for all samples with that patient ID. If you enter a patient ID and an analysis
date, the system searches only for samples with that patient ID and analysis
date. If you do not complete any of the criteria fields, the system recalls all the
samples stored in the system.
2. Type the search criteria and press
Enter after you complete each field.
for a selected date type the date in both Analysis Date fields.
from the earliest date
to the present date
leave the Analysis Date and Analysis Time fields blank.
(Continued)
4
Menu Code
1