Filter
Top Products
4Ć8
800 Series Operator's Manual
System Message Description
Interfering
Substance: Glu
Appears when the system detects substances in the sample that
may interfere with glucose measurement. See Troubleshooting
System Messages, page 4-118.
NOTE: Repeated, unexpected occurrence of this message may
indicate sensor failure. See Troubleshooting Patient Results, page
4-98.
Interfering
Substance: Lac
Appears when the system detects substances in the sample that
may interfere with lactate measurement. See Troubleshooting
System Messages, page 4-118.
NOTE: Repeated, unexpected occurrence of this message may
indicate sensor failure. See Troubleshooting Patient Results, page
4-98.
Interfering
Substance: tHb
Appears when the CO-ox module detects the presence of
substances in the sample that may interfere with CO-ox
measurement and will try to correct the measurement to account
for the substance. See Troubleshooting System Messages, page
4-118.
Insufficient COox
Sample
Appears when there is not enough sample to fill the CO-ox
sample chamber, so the measurement cannot be completed. See
Troubleshooting System Messages, page 4-117.
Insufficient Sample Appears when there is not enough sample to fill the measurement
block and you manually position the sample for measurement.
See Troubleshooting System Messages, page 4-118.
Maintenance Due
Today
Appears when a scheduled, non-daily maintenance task is due to
be performed.
Meas Module Door
Open
Appears when the measurement module door is open.
Meas Module
Temperature Error
Appears when the measurement module temperature is out of
range and the system cannot accept sample analysis requests. See
Troubleshooting System Messages, page 4-119.
Meas Module
Temperature
Warning
Appears when the temperature of the measurement module is
outside of the 37 ± 0.15°C range but can accept sample analysis
requests. See Troubleshooting System Messages, page 4-119.
No Paper In Printer
Appears when the system detects that there is no paper in the roll
printer.
(Continued)
860
860