System Administration 5Ć43
1. Access the Correlation Coefficients screen from the Menu screen:
a. Select 5 Operating Setup and press Enter.
b. Select 8 Correlation and press Enter.
The Correlation Coefficients screen appears, as shown in Figure 5-26.
2. Type the slope and offset values you want for each parameter.
3. Press
Done when you finish.
4. Define another setup function or press
Exit Menu to return to the Ready
screen.
If you press Done before completing all the fields, the Incomplete Data Entry
message appears. Press
OK and complete the required fields.
If you type an invalid value in a field and press Done, the Invalid Entry message
box appears. Press
OK and type a valid entry in the field.
pH values on this screen are always expressed in pH units and not in nmols/L.