Filter
Top Products
Glossary-13
Glossary
system message
A message that appears in the status area of the screen
that describes the status of certain system operations.
System Options
The System Setup menu option that lets you define
system options. The options include Reporting
Resolution, Beeper Volume, Auto Move Capillary
Sample, and Roll Printer.
System Setup
The Menu screen option that lets you define system
functions. You can define the date and time, enable and
disable parameters, define panels, define
communication parameters, and define system options.
System Utilities
The Menu screen option that lets you access file and
system management functions, including Standby, Disk
Utilities, and Shutdown.
Target limit
The values that determine the limits above and below
the target mean for QC sample analysis.
Temp/pAtm
The Troubleshooting menu option that lets you perform
a temperature test and a barometer test.
Troubleshooting
The Menu screen option that lets you access diagnostic
tests.
Units/Values
The Operating Setup menu option that lets you select
measurement units that the system uses to display
primary, entered, and calculated parameters.
user interface
The components of the 800 system, including the
screen, keypad, and printer that let you direct system
activities.
Valves
The Fluidics System menu option that lets you perform
automatic and manual valve tests.
View Status
The F-key that displays a status log that lists the last 72
hours of diagnostic messages and samples for which
required data entry is incomplete. The View Status
F-key only appears if the status log contains messages.
Wash
A Maintenance menu option that lets you perform a
wash.
waste cap
The component that seals the waste bottle.
waste components
The components that collect the waste reagents and
samples from the system and then clean and prepare the
system for the next activity. They consist of a waste
bottle, waste detector probes, a waste cap, a pump, and
tubing.