Filter
Top Products
5. Edit, print, or transmit the appropriate patient reports.
6. Press
Done when you finish.
more than one sample
is found
the Done Options message box appears.
S Select Next Record and press OK to view the next report
that appears on the log.
S Select Previous Record and press OK to view the
previous report that appears on the log.
S Select Search Criteria Screen and press OK to view the
Patient Data Search Criteria screen.
S Press Cancel to close this message box and return to the
Search Results screen.
one sample is found the Patient Data Search Criteria screen appears as shown
in Figure 2-19.
Refer to the following procedures to edit patient data, print the report or the
log, or transmit the report.
If you press Home while in the Patient Data Search Criteria screen, all data is
cleared from the fields and the Ready screen appears.
If you want to recall patient samples for which no fields in the Patient Information
screen were completed, use the sequence number or the date and time of analysis
for the search criteria. View the Patient Data Search Log to locate the sequence
number and date and time of analysis.
If the selected sample has a D code or status message associated with it, the View
Diagnostics F-key appears. Press View Diagnostics
to view the Diagnostics
message box. Scroll through the D codes and messages. Press Cancel when you
finish.