3Ć97
Maintaining the System
Platen
Roller Cage
Roller Cage Shaft
Large Tubing
Small Tubing
Tubing Cuff
6. Clean the roller cage shaft with a lint-free tissue moistened with reagent water
and dry thoroughly.
7. Place the new roller cage on the shaft.
8. Turn the roller cage on the shaft until the roller cage stops.
9. Press the roller cage down until the cage snaps into place.
10. Reinstall the tubing as described in Replacing the Pump Tubing, page 3-39.
11. Press
Continue.
A wash sequence starts. When the wash sequence finishes, a message box
appears prompting you to perform a two-point calibration.
12. Press
Yes to perform a two-point calibration.