Filter
Top Products
800 Series Operator's Manual5Ć30
NOTE:ĄĂYou must enter values into both the Supervisor Password and the
Menu Password fields. If you do not use or uniquely define one or the other
password, you can enter the default password. The default for both passwords
is 12345.
3. Enter the supervisor or menu options password you want to use:
a. Type the password in the Supervisor Password field and press
Enter.
b. Type the same password in the Supervisor Password Check field and press
Enter.
You can use the same password for the supervisor and menu passwords or
create a different password for each.
c. Type the password in the Menu Password field and press Enter.
d. Type the same password in the Menu Password Check field and press
Enter.
4. Press
Done.
If the Password Check you typed does not match the Password, the system
prompts you to try again. Press
OK and retype the Password Check.
5. Define another setup function or press
Exit Menu to return to the Ready
screen.
If you press Done before you assign passwords, a message appears prompting you
to enter a password. Press
OK.
You can enter up to 8 alphanumeric characters including the dash in the password
field.