Filter
Top Products
Differences in Command Function
Issue 4 September 1995
E-7
Wait-time
This command sets a length of time for a call to wait in the queue. The command
also specifies one of the following treatments while the call advances in the
queue(s):
■ Silence
■ Ringing
■ Music
■ I-silent (G3V4 and later releases)
■ Alternate Audio/Music Source (G3V4 and later releases)
Busy
This command terminates vector processing and gives the caller a busy signal.
Table E-5. G2/G3 Differences for Wait Command
GENERIC 3 GENERIC 2
The system-wide music-on-hold
feature must be active for music
treatment on the command.
With G3V4 and later releases, an
alternate audio/music source can be
administered for a
wait-time
step.
A separate music option is available
for Call Vectoring.
Table E-6. G2/G3 Differences for Busy Command
GENERIC 3 GENERIC 2
A timeout after 45 seconds is
provided.
A 20 second timeout is provided for
both CO and non-CO trunks.