Filter
Top Products
Troubleshooting Vectors
D-14 Issue 4 September 1995
■ Event Data 1 is a 9-character fields that contains data in one of two
formats:
—
<number1>/<number2>
(for example,
12/5
), where
<number1>
is
the vector number associated with the vector event, and where
<number2>
is the step number associated with the vector event.
This format is used for events to which an event type in the range of
0 through 499 is assigned.
—
Split<number>
(for example,
Split 89
), where
<number>
is the split
associated number associated with the vector event. This format is
used for events to which an event type in the range of 500 through
999 is assigned.
■ Event Data 2 is an 8-character field that contains additional data encoded
as a hex number (for example,
4C
). This number serves as a call identifier.
If two or more events with an identical identifier occur at about the same
time, it can be concluded that the events were caused by the same call.
■ First Occur is an 11-character field that contains the date and time when
the vector event first occurred (for example,
09/28/13:43
).
■ Last Occur is an 11-character field that contains the date and time when
the vector event last occurred (for example,
09/28/13:48
).
■ Evnt Cnt (Event Count) contains a number ranging from
1
to
255
that
indicates the total number of vector events of this type that have occurred.
Summary of Vector Events
This section contains a table that does the following:
■ Lists the number of each vector event
■ Provides a description and an explanation (and sometimes possible
causes and solutions) for each event type