Filter
Top Products
Call Vectoring Commands
A-2 Issue 4 September 1994
Command Description/Reference
The following table provides a brief description of the function of each of the Call
Vectoring command. Also included is the page where the command is described
in full.
Table A-1. Command Description/Reference Table
Command Function Page
adjunct routing
To request adjunct to route call. page A-15
announcement
To connect caller to delay recording. page A-22
busy
To connect caller to busy tone. page A-24
check-backup split
(skill)
To connect/queue call on a conditional
basis.
page A-26
collect digits
To prompt caller for digits. page A-31
converse-on split
(skill)
To deliver a call to a converse split (skill)
and to activate a Voice Response Unit
(VRU).
page A-35
disconnect
To force disconnect of call with optional
announcement.
page A-46
goto step
To cause unconditional/conditional
branch to another step in the vector.
page A-48
goto vector
To cause unconditional/conditional
branch to another vector.
page A-54
messaging split
(skill)
To allow caller to leave message for
callback.
page A-61
queue-to main split
(skill)
To connect/queue call to the primary
split (skill).
page A-65
route-to
To connect call to destination entered via
collect digits
command, or to connect
call to internal/external destination.
page A-69
stop
To stop further vector processing. page A-77
wait-time
To initiate feedback to caller and delay
processing of the next step.
page A-79