Filter
Top Products
Call Vectoring Commands
A-50 Issue 4 September 1995
digits: the following values are accepted:
priority level:
l
(low),
m
(medium),
h
(high),
t
(top).
day:
mon, tue, wed, thu, fri, sat, sun, all (that is, "on any day of the week")
.
hour:
00
to
23
(military format).
1.Comparators =, >=, <=, <> are only available for these conditions with
“Vectoring (G3V4 Enhanced).”
1.Comparators >, >=, <, <=, <> are only available for
the
goto step if digits
command with Vectoring (G3V4
Enhanced)
2.Wildcards (+, ?) can only be used with Vectoring
(G3V4 Enhanced). The + represents a group of digits
(0 or more) and can only be used as the first or last
character of the string. Only one + can be used in any
digit string. The ? represents a single digit. Any
number of them can be used at any position in the digit
string.
None
is only a valid entry with G3V4 and later
releases.
staffed-agents >, >=, =, <>
0-199
(G3i),
0-998
(G3r)
0-149
(G3s, G3vs)
<, <=
1-200
(G3i),
1-999
(G3r)
1-150
(G3s, G3vs)
command comparator
1
value
2
goto step
<step#> if digits
<, <=, >, >= String of 0-9
=, <> String of 0-9, #, +,
?, none
goto step
<step#> if ani
<, <=, >, >= String of 0-9
=, <> String of 0-9, #, +,
?, none
goto step
<step#> if ii-digits
<, <=, >, >= Two consecutive
digits from string
of 0-9
=, <> Two consecutive
digits from string
of 0-9, +, ?, none
condition:
comparator:
1
threshold: